B-7 Ceramic Tonearm
The B-7 CERAMIC ball bearing tone arm is a top class exclusive model that features a Titanium arm wand made in six different thickness sections to enhance the best damping vibration feedback effect due both to the material and the geometry.
The rear arm wand is dampened with silicon spacer to reduce unwanted vibration. The rear arm wand handles a finely machined Stainless Steel counterweight.
The B-7 CERAMIC features four high precision custom made for Gold Note by GRW-Germany micro ceramic ball bearings designed to enable extraordinary low noise quality allows the smoothest fine musical details.
The vertical ball bearings are pivoted through custom stainless steel threaded bolts manually adjusted, while the horizontal movement is driven by two micro ball bearings directly inserted in the main rectified pivot of the arm runs into the 23mm diameter arm shaft from which the arm can be secured to the turntable plinth.
The B-7 CERAMIC azimuth is adjustable through a pair of 2mm micro bolt in order to set up the shell perfectly aligned.
The Tone-Arm exclusively features a double counterweight to set up most of the market phono cartridge up to 15 gram mass. Optionally other extra weights are available to handle phono cartridges with higher mass.
The B-7 CERAMIC effective length of 223mm with 12mm overhang let the arm easily installed in any turntable available on the market.
Typology: 9” Ball Bearing Tonearm
Effective length: 223mm
Arm wand: titanium with 6 different section of thickness
Dynamic effective mass: 10g
VTF: 0.186N (19g)
VTA: adjustable on collar
Lift: hydraulic and adjustable
Anti skating: wire
Azimuth: adjustable through 2mm hex-bolt on headshell
Internal cables: AWG36 Hyper Litz shielded 99,9999% OFC
External cables: 1m custom 5 pole DIN/RCA
Special: Gold Note audio signal cable
Total length: 325mm
Total weight: 380g